Products

Description

The DSX models are designed for industrial use and have a large ouput capacity with e.g. increased cutting depth, pneumatic plunging and a motor rating upto 7.5 HP. A wide variety of accessories is available, such as many automatic functionalities and programming of cutting patterns.



Downloads

Brochure DSX

Characteristics

  • Clip board for job cards Clip board 1/1 Handy holder of operator information or documents at the side of the control box.
  • Cutting depth 80 mm Maximum thickness of the material: 80 mm
  • Easy to use control panel control panel 1/1 Depending on the different options ordered the control panel will be delivered only with the relevant buttons.
  • Entry and exit rollers for panel handling Entry and exit rollers for panel handling 1/1 Left- and right-side entry and exit rollers for easy panel handling.
  • Failure diagnosis Failure diagnosis 1/1 Location of possible failures by easy accesible LED display
  • For many different materials Suitable for a wide range of materials, from wood-based to plastics, aluminium and others.
  • Heavy, self-rigid carrying guidance modules 1/1 600 x 100 mm rectangular steel casing for free standing machine frame, with tension-free hardened steelbar guidance module for horizontal travel.
  • No special floor needed No special floor needed 1/1 Completely self-rigid and free standing construction of basic framework.
  • Pneumatic locking of saw-unit at working height, with fine adjustment Pneumatic locking of saw-unit at working height 1/1 Setting of the measures for horizontal cutting, independent of the height of the position, always at eye level, with micrometric adjustment for fine tuning.
  • Pneumatic plunging of saw-unit Easy movement of the saw-unit in and out of the panel, also when sawing in higher cutting positions
  • Precision within DIN 875/1 (0.1 mm.) Contact-free aligned hardened steelbar guidance for horizontal travel,from precision template.
  • Programming rail for repetitive dimensions Manual programming rail, for setting 5 different horizontal fixed measures.
  • Repeat-stop for strip cutting Repeat-stop for strip cutting 1/1 Repeat stop facility with track-bearing, running on the top cut section of the panel, allowing repetitive horizontal strip cutting, adjustable from 0-500mm.
  • Robust, fine-adjustable measuring stop 1/1 Heavy cast iron flip-stop with micrometric adjustment for vertical cuts, on 30 mm steelbar guidance.
  • Standard equipped with 4 kW motor (s6) The D-range is from standard equipped with a powerfull 4 kW (S6) motor.

Options/accessories

  • 2 speed motor
  • Automatic rotation of saw-unit
  • Automatic shifting backframe
  • Digital scale
  • Double bearing bottom rollers, with pneumatic panel clamp and panel turn over possibility.
More options Less options

Description

The DSX models are designed for industrial use and have a large ouput capacity with e.g. increased cutting depth, pneumatic plunging and a motor rating upto 7.5 HP. A wide variety of accessories is available, such as many automatic functionalities and programming of cutting patterns.

Characteristics

  • Clip board for job cards Clip board 1/1 Handy holder of operator information or documents at the side of the control box.
  • Cutting depth 80 mm Maximum thickness of the material: 80 mm
  • Easy to use control panel control panel 1/1 Depending on the different options ordered the control panel will be delivered only with the relevant buttons.
  • Entry and exit rollers for panel handling Entry and exit rollers for panel handling 1/1 Left- and right-side entry and exit rollers for easy panel handling.
  • Failure diagnosis Failure diagnosis 1/1 Location of possible failures by easy accesible LED display
  • For many different materials Suitable for a wide range of materials, from wood-based to plastics, aluminium and others.
  • Heavy, self-rigid carrying guidance modules 1/1 600 x 100 mm rectangular steel casing for free standing machine frame, with tension-free hardened steelbar guidance module for horizontal travel.
  • No special floor needed No special floor needed 1/1 Completely self-rigid and free standing construction of basic framework.
  • Patented Limpio dust collection system, emission less than 0.5 mg/m3 Patented Limpio dust collection system 1/1 The patented ELCON Limpio-system provides the collection of saw dust both from the front and from the back of the panel. During cutting, the saw-blade runs in a almost fully closed area, where the dust is extracted directly at the source where it is created. Additional advantages of the Limpio-system are a back-side support over the full height of the panel and also the complete protection of the saw blade from cutting into any back side supports.
  • Pneumatic locking of saw-unit at working height, with fine adjustment Pneumatic locking of saw-unit at working height 1/1 Setting of the measures for horizontal cutting, independent of the height of the position, always at eye level, with micrometric adjustment for fine tuning.
  • Pneumatic plunging of saw-unit Easy movement of the saw-unit in and out of the panel, also when sawing in higher cutting positions
  • Precision within DIN 875/1 (0.1 mm.) Contact-free aligned hardened steelbar guidance for horizontal travel,from precision template.
  • Programming rail for repetitive dimensions Manual programming rail, for setting 5 different horizontal fixed measures.
  • Repeat-stop for strip cutting Repeat-stop for strip cutting 1/1 Repeat stop facility with track-bearing, running on the top cut section of the panel, allowing repetitive horizontal strip cutting, adjustable from 0-500mm.
  • Robust, fine-adjustable measuring stop 1/1 Heavy cast iron flip-stop with micrometric adjustment for vertical cuts, on 30 mm steelbar guidance.
  • Standard equipped with 4 kW motor (s6) The D-range is from standard equipped with a powerfull 4 kW (S6) motor.

Options/accessories

  • 2 speed motor
  • Automatic rotation of saw-unit
  • Digital scale
  • Double bearing bottom rollers, with pneumatic panel clamp and panel turn over possibility.
  • Electric positioning module for vertical cutting
More options Less options

Description

The DSX models are designed for industrial use and have a large ouput capacity with e.g. increased cutting depth, pneumatic plunging and a motor rating upto 7.5 HP. A wide variety of accessories is available, such as many automatic functionalities and programming of cutting patterns.

Characteristics

  • Clip board for job cards Clip board 1/1 Handy holder of operator information or documents at the side of the control box.
  • Cutting depth 80 mm Maximum thickness of the material: 80 mm
  • Easy to use control panel control panel 1/1 Depending on the different options ordered the control panel will be delivered only with the relevant buttons.
  • Entry and exit rollers for panel handling Entry and exit rollers for panel handling 1/1 Left- and right-side entry and exit rollers for easy panel handling.
  • Failure diagnosis Failure diagnosis 1/1 Location of possible failures by easy accesible LED display
  • For many different materials Suitable for a wide range of materials, from wood-based to plastics, aluminium and others.
  • Heavy, self-rigid carrying guidance modules 1/1 600 x 100 mm rectangular steel casing for free standing machine frame, with tension-free hardened steelbar guidance module for horizontal travel.
  • No special floor needed No special floor needed 1/1 Completely self-rigid and free standing construction of basic framework.
  • Patented Limpio dust collection system, emission less than 0.5 mg/m3 Patented Limpio dust collection system 1/1 The patented ELCON Limpio-system provides the collection of saw dust both from the front and from the back of the panel. During cutting, the saw-blade runs in a almost fully closed area, where the dust is extracted directly at the source where it is created. Additional advantages of the Limpio-system are a back-side support over the full height of the panel and also the complete protection of the saw blade from cutting into any back side supports.
  • Pneumatic locking of saw-unit at working height, with fine adjustment Pneumatic locking of saw-unit at working height 1/1 Setting of the measures for horizontal cutting, independent of the height of the position, always at eye level, with micrometric adjustment for fine tuning.
  • Pneumatic plunging of saw-unit Easy movement of the saw-unit in and out of the panel, also when sawing in higher cutting positions
  • Precision within DIN 875/1 (0.1 mm.) Contact-free aligned hardened steelbar guidance for horizontal travel,from precision template.
  • Programming rail for repetitive dimensions Manual programming rail, for setting 5 different horizontal fixed measures.
  • Repeat-stop for strip cutting Repeat-stop for strip cutting 1/1 Repeat stop facility with track-bearing, running on the top cut section of the panel, allowing repetitive horizontal strip cutting, adjustable from 0-500mm.
  • Robust, fine-adjustable measuring stop 1/1 Heavy cast iron flip-stop with micrometric adjustment for vertical cuts, on 30 mm steelbar guidance.
  • Standard equipped with 4 kW motor (s6) The D-range is from standard equipped with a powerfull 4 kW (S6) motor.

Options/accessories

  • 2 speed motor
  • Automatic rotation of saw-unit
  • Automatic shifting backframe
  • Digital scale
  • Double bearing bottom rollers, with pneumatic panel clamp and panel turn over possibility.
More options Less options

Description

The DSX models are designed for industrial use and have a large ouput capacity with e.g. increased cutting depth, pneumatic plunging and a motor rating upto 7.5 HP. A wide variety of accessories is available, such as many automatic functionalities and programming of cutting patterns.

Characteristics

  • Automatic cutting cycle horizontal and vertical Pre-programmed and fully automatic operation of the movements of the saw-unit into the panel, the cutting travel, out of the panel and return to the starting position, for both the horizontal and vertical cutting cycle.
  • Clip board for job cards Clip board 1/1 Handy holder of operator information or documents at the side of the control box.
  • Cutting depth 80 mm Maximum thickness of the material: 80 mm
  • Entry and exit rollers for panel handling Entry and exit rollers for panel handling 1/1 Left- and right-side entry and exit rollers for easy panel handling.
  • Failure diagnosis Failure diagnosis 1/1 Location of possible failures by easy accesible LED display
  • For many different materials Suitable for a wide range of materials, from wood-based to plastics, aluminium and others.
  • Free adjustable length of saw-course The length of the cutting travel for both the horizontal and the vertical cutting cycle can be pre-programmed to the length and the height of the panel.
  • Heavy, self-rigid carrying guidance modules 1/1 600 x 100 mm rectangular steel casing for free standing machine frame, with tension-free hardened steelbar guidance module for horizontal travel.
  • No special floor needed No special floor needed 1/1 Completely self-rigid and free standing construction of basic framework.
  • Pneumatic locking of saw-unit at working height, with fine adjustment Pneumatic locking of saw-unit at working height 1/1 Setting of the measures for horizontal cutting, independent of the height of the position, always at eye level, with micrometric adjustment for fine tuning.
  • Pneumatic plunging of saw-unit Easy movement of the saw-unit in and out of the panel, also when sawing in higher cutting positions
  • Precision within DIN 875/1 (0.1 mm.) Contact-free aligned hardened steelbar guidance for horizontal travel,from precision template.
  • Programming rail for repetitive dimensions Manual programming rail, for setting 5 different horizontal fixed measures.
  • Repeat-stop for strip cutting Repeat-stop for strip cutting 1/1 Repeat stop facility with track-bearing, running on the top cut section of the panel, allowing repetitive horizontal strip cutting, adjustable from 0-500mm.
  • Robust, fine-adjustable measuring stop 1/1 Heavy cast iron flip-stop with micrometric adjustment for vertical cuts, on 30 mm steelbar guidance.
  • Standard equipped with 4 kW motor (s6) The D-range is from standard equipped with a powerfull 4 kW (S6) motor.

Options/accessories

  • 2 speed motor
  • Automatic positioning of saw-beam
  • Automatic rotation of saw-unit
  • Automatic shifting backframe
  • Digital scale
More options Less options

Description

The DSX models are designed for industrial use and have a large ouput capacity with e.g. increased cutting depth, pneumatic plunging and a motor rating upto 7.5 HP. A wide variety of accessories is available, such as many automatic functionalities and programming of cutting patterns.

Characteristics

  • Automatic cutting cycle horizontal and vertical Pre-programmed and fully automatic operation of the movements of the saw-unit into the panel, the cutting travel, out of the panel and return to the starting position, for both the horizontal and vertical cutting cycle.
  • Clip board for job cards Clip board 1/1 Handy holder of operator information or documents at the side of the control box.
  • Cutting depth 80 mm Maximum thickness of the material: 80 mm
  • Easy to use Touchscreen 1/1 Easy dummyproof touch screen for entering all possible cutting cycles. Programmable in different languages.
  • Entry and exit rollers for panel handling Entry and exit rollers for panel handling 1/1 Left- and right-side entry and exit rollers for easy panel handling.
  • Failure diagnosis Failure diagnosis 1/1 Location of possible failures by easy accesible LED display
  • For many different materials Suitable for a wide range of materials, from wood-based to plastics, aluminium and others.
  • Free adjustable length of saw-course The length of the cutting travel for both the horizontal and the vertical cutting cycle can be pre-programmed to the length and the height of the panel.
  • Heavy, self-rigid carrying guidance modules 1/1 600 x 100 mm rectangular steel casing for free standing machine frame, with tension-free hardened steelbar guidance module for horizontal travel.
  • No special floor needed No special floor needed 1/1 Completely self-rigid and free standing construction of basic framework.
  • Patented Limpio dust collection system, emission less than 0.5 mg/m3 Patented Limpio dust collection system 1/1 The patented ELCON Limpio-system provides the collection of saw dust both from the front and from the back of the panel. During cutting, the saw-blade runs in a almost fully closed area, where the dust is extracted directly at the source where it is created. Additional advantages of the Limpio-system are a back-side support over the full height of the panel and also the complete protection of the saw blade from cutting into any back side supports.
  • Pneumatic locking of saw-unit at working height, with fine adjustment Pneumatic locking of saw-unit at working height 1/1 Setting of the measures for horizontal cutting, independent of the height of the position, always at eye level, with micrometric adjustment for fine tuning.
  • Pneumatic plunging of saw-unit Easy movement of the saw-unit in and out of the panel, also when sawing in higher cutting positions
  • Precision within DIN 875/1 (0.1 mm.) Contact-free aligned hardened steelbar guidance for horizontal travel,from precision template.
  • Programming rail for repetitive dimensions Manual programming rail, for setting 5 different horizontal fixed measures.
  • Repeat-stop for strip cutting Repeat-stop for strip cutting 1/1 Repeat stop facility with track-bearing, running on the top cut section of the panel, allowing repetitive horizontal strip cutting, adjustable from 0-500mm.
  • Robust, fine-adjustable measuring stop 1/1 Heavy cast iron flip-stop with micrometric adjustment for vertical cuts, on 30 mm steelbar guidance.
  • Standard equipped with 4 kW motor (s6) The D-range is from standard equipped with a powerfull 4 kW (S6) motor.

Options/accessories

  • 2 speed motor
  • Automatic positioning of saw-beam
  • Automatic rotation of saw-unit
  • Digital scale
  • Double bearing bottom rollers, with pneumatic panel clamp and panel turn over possibility.
More options Less options

Description

The DSX models are designed for industrial use and have a large ouput capacity with e.g. increased cutting depth, pneumatic plunging and a motor rating upto 7.5 HP. A wide variety of accessories is available, such as many automatic functionalities and programming of cutting patterns.

Characteristics

  • Automatic cutting cycle horizontal and vertical Pre-programmed and fully automatic operation of the movements of the saw-unit into the panel, the cutting travel, out of the panel and return to the starting position, for both the horizontal and vertical cutting cycle.
  • Clip board for job cards Clip board 1/1 Handy holder of operator information or documents at the side of the control box.
  • Cutting depth 80 mm Maximum thickness of the material: 80 mm
  • Easy to use Touchscreen 1/1 Easy dummyproof touch screen for entering all possible cutting cycles. Programmable in different languages.
  • Entry and exit rollers for panel handling Entry and exit rollers for panel handling 1/1 Left- and right-side entry and exit rollers for easy panel handling.
  • Failure diagnosis Failure diagnosis 1/1 Location of possible failures by easy accesible LED display
  • For many different materials Suitable for a wide range of materials, from wood-based to plastics, aluminium and others.
  • Free adjustable length of saw-course The length of the cutting travel for both the horizontal and the vertical cutting cycle can be pre-programmed to the length and the height of the panel.
  • Heavy, self-rigid carrying guidance modules 1/1 600 x 100 mm rectangular steel casing for free standing machine frame, with tension-free hardened steelbar guidance module for horizontal travel.
  • No special floor needed No special floor needed 1/1 Completely self-rigid and free standing construction of basic framework.
  • Patented Limpio dust collection system, emission less than 0.5 mg/m3 Patented Limpio dust collection system 1/1 The patented ELCON Limpio-system provides the collection of saw dust both from the front and from the back of the panel. During cutting, the saw-blade runs in a almost fully closed area, where the dust is extracted directly at the source where it is created. Additional advantages of the Limpio-system are a back-side support over the full height of the panel and also the complete protection of the saw blade from cutting into any back side supports.
  • Pneumatic locking of saw-unit at working height, with fine adjustment Pneumatic locking of saw-unit at working height 1/1 Setting of the measures for horizontal cutting, independent of the height of the position, always at eye level, with micrometric adjustment for fine tuning.
  • Pneumatic plunging of saw-unit Easy movement of the saw-unit in and out of the panel, also when sawing in higher cutting positions
  • Precision within DIN 875/1 (0.1 mm.) Contact-free aligned hardened steelbar guidance for horizontal travel,from precision template.
  • Programming rail for repetitive dimensions Manual programming rail, for setting 5 different horizontal fixed measures.
  • Repeat-stop for strip cutting Repeat-stop for strip cutting 1/1 Repeat stop facility with track-bearing, running on the top cut section of the panel, allowing repetitive horizontal strip cutting, adjustable from 0-500mm.
  • Robust, fine-adjustable measuring stop 1/1 Heavy cast iron flip-stop with micrometric adjustment for vertical cuts, on 30 mm steelbar guidance.
  • Standard equipped with 4 kW motor (s6) The D-range is from standard equipped with a powerfull 4 kW (S6) motor.

Options/accessories

  • 2 speed motor
  • Automatic positioning of saw-beam
  • Automatic rotation of saw-unit
  • Automatic shifting backframe
  • Digital scale
More options Less options

155 185 215
A 945 mm 945 mm 945 mm
B 1450 mm 1450 mm 1450 mm
C 4510 mm 4510 mm 5510 mm
D 1980 mm 2280 mm 2580 mm
E 2265 mm 2565 mm 2865 mm
Weight (kg) 785 830 905
Maximum cutting length 3300 mm 3300 mm 4300 mm
Maximum cutting height 1550 mm 1850 mm 2110 mm hor.
2150 mm vert.
Maximum cutting depth 80 mm
Motor (S6) 4 kW
Saw speed 4200 rpm
Diameter saw blade 300 mm
Electrics 400V/3ph/50Hz
Compressor minimum 6 bar
Dust collector requirements 20m/sec


More information is available in the datasheet.