Products

Description

The ADVANCE range makes cutting panels to size very easy, without the need for manipulation, turning or stocking of strips in between horizontal and vertical cuts. Moreover it offers the possibility to trim the bottom of (multiple) panels.

Video

Downloads

Brochure Advance

Characteristics

  • Advance clamping system for horizontal and vertical cutting to size in one course Advance clamping system 1/1 Lifting of the panels for the bottom reference cut and for strip cutting from the bottom, allowing strips to be cut to size without taking them of the machine and bringing them back on for temporary stocking in between.
  • Automatic shifting backframe To prevent damaging the support strip when cutting horizontally, the backframe is automatically lifted when the saw blade is at the height of one of the strips.
  • Clip board for job cards Clip board 1/1 Handy holder of operator information or documents at the side of the control box.
  • Cutting depth 80 mm Maximum thickness of the material: 80 mm
  • Double bearing bottom rollers, with pneumatic panel clamp and panel turn over possibility Double bearing bottom rollers 1/1 For transport of heavy panels or a package of panels simultaneously, every meter-section 5 aluminium rollers are provided. A pneumatic clamp, that can be activated from the control panel, prevents that panels on the transportrollers move while cutting. In this way also light and thin panels can be cut accurately.In order to rotate bigger panels, the distance between 2 of the bottom rollers is chosen such that a panel can be turned very easily.
  • Entry and exit rollers for panel handling Entry and exit rollers for panel handling 1/1 Left- and right-side entry and exit rollers for easy panel handling.
  • Failure diagnosis Failure diagnosis 1/1 Location of possible failures by easy accesible LED display
  • For many different materials Suitable for a wide range of materials, from wood-based to plastics, aluminium and others.
  • Heavy, self-rigid carrying guidance modules 1/1 600 x 100 mm rectangular steel casing for free standing machine frame, with tension-free hardened steelbar guidance module for horizontal travel.
  • No special floor needed No special floor needed 1/1 Completely self-rigid and free standing construction of basic framework.
  • Pneumatic locking of saw-unit at working height, with fine adjustment Pneumatic locking of saw-unit at working height 1/1 Setting of the measures for horizontal cutting, independent of the height of the position, always at eye level, with micrometric adjustment for fine tuning.
  • Pneumatic plunging of saw-unit Easy movement of the saw-unit in and out of the panel, also when sawing in higher cutting positions
  • Precision within DIN 875/1 (0.1 mm.) Contact-free aligned hardened steelbar guidance for horizontal travel,from precision template.
  • Programming rail for repetitive dimensions Manual programming rail, for setting 5 different horizontal fixed measures.
  • Standard equipped with 4 kW motor (s6) The D-range is from standard equipped with a powerfull 4 kW (S6) motor.

Options/accessories

  • 2 speed motor
  • Additional ADVANCE clamps
  • Automatic rotation of saw-unit
  • Digital scale
  • Electric positioning module for vertical cutting
More options Less options

Description

The ADVANCE range makes cutting panels to size very easy, without the need for manipulation, turning or stocking of strips in between horizontal and vertical cuts. Moreover it offers the possibility to trim the bottom of (multiple) panels

Characteristics

  • Advance clamping system for horizontal and vertical cutting to size in one course Advance clamping system 1/1 Lifting of the panels for the bottom reference cut and for strip cutting from the bottom, allowing strips to be cut to size without taking them of the machine and bringing them back on for temporary stocking in between.
  • Automatic cutting cycle horizontal and vertical Pre-programmed and fully automatic operation of the movements of the saw-unit into the panel, the cutting travel, out of the panel and return to the starting position, for both the horizontal and vertical cutting cycle.
  • Automatic shifting backframe To prevent damaging the support strip when cutting horizontally, the backframe is automatically lifted when the saw blade is at the height of one of the strips.
  • Clip board for job cards Clip board 1/1 Handy holder of operator information or documents at the side of the control box.
  • Cutting depth 80 mm Maximum thickness of the material: 80 mm
  • Double bearing bottom rollers, with pneumatic panel clamp and panel turn over possibility Double bearing bottom rollers 1/1 For transport of heavy panels or a package of panels simultaneously, every meter-section 5 aluminium rollers are provided. A pneumatic clamp, that can be activated from the control panel, prevents that panels on the transportrollers move while cutting. In this way also light and thin panels can be cut accurately.In order to rotate bigger panels, the distance between 2 of the bottom rollers is chosen such that a panel can be turned very easily.
  • Easy to use Touchscreen 1/1 Easy dummyproof touch screen for entering all possible cutting cycles. Programmable in different languages.
  • Entry and exit rollers for panel handling Entry and exit rollers for panel handling 1/1 Left- and right-side entry and exit rollers for easy panel handling.
  • Failure diagnosis Failure diagnosis 1/1 Location of possible failures by easy accesible LED display
  • For many different materials Suitable for a wide range of materials, from wood-based to plastics, aluminium and others.
  • Free adjustable length of saw-course The length of the cutting travel for both the horizontal and the vertical cutting cycle can be pre-programmed to the length and the height of the panel.
  • Heavy, self-rigid carrying guidance modules 1/1 600 x 100 mm rectangular steel casing for free standing machine frame, with tension-free hardened steelbar guidance module for horizontal travel.
  • No special floor needed No special floor needed 1/1 Completely self-rigid and free standing construction of basic framework.
  • Pneumatic locking of saw-unit at working height, with fine adjustment Pneumatic locking of saw-unit at working height 1/1 Setting of the measures for horizontal cutting, independent of the height of the position, always at eye level, with micrometric adjustment for fine tuning.
  • Pneumatic plunging of saw-unit Easy movement of the saw-unit in and out of the panel, also when sawing in higher cutting positions
  • Precision within DIN 875/1 (0.1 mm.) Contact-free aligned hardened steelbar guidance for horizontal travel,from precision template.
  • Programming rail for repetitive dimensions Manual programming rail, for setting 5 different horizontal fixed measures.
  • Robust, fine-adjustable measuring stop 1/1 Heavy cast iron flip-stop with micrometric adjustment for vertical cuts, on 30 mm steelbar guidance.
  • Standard equipped with 4 kW motor (s6) The D-range is from standard equipped with a powerfull 4 kW (S6) motor.

Options/accessories

  • 2 speed motor
  • Additional ADVANCE clamps
  • Automatic positioning of saw-beam
  • Automatic rotation of saw-unit
  • Digital scale
More options Less options

185 215
A 945 mm 945 mm
B 1750 mm 1750 mm
C 5510/6510 mm 5510/6510 mm
D 2580 mm 2580 mm
E 3050 mm 3050 mm
Weight (kg) Manual: 1000
Automatic: 1040
Maximum cutting length 4.300/5.300 mm
Maximum cutting height 2000 mm hor.
2100 mm vert.
Maximale plaathoogte 2100 mm
Max. zaagdiepte, met Advance klemmen 55 mm
Max. zaagdiepte, zonder Advance klemmen 80 mm
Speed Automatic: 0 - 20m/min
Motor (S6) 4 kW
Diameter saw blade 300 mm
Asgat 30 mm
Electrics 400V/3f/50Hz
Required pressure 6 bar
Vacuum 1x100mm